Ubuntu on the Acer Nitro 5

[updated June 2021]

[June 2021] New chapter about Ubuntu 20.04

The Acer Nitro 5 is an interesting breed; decent computing power, a mid-range SSD, a large screen with high contrast, a decent and solid keyboard with good haptics at an ok price – but will it run Ubuntu 18.04? (yes, it will – also with Ubuntu 20.04)

Live Boot from USB

The Nitro comes with Windows 10 home pre-installed and UEFI secure boot enabled – booting Ubuntu from an USB drive thankfully doesn’t require disabling secure boot. I downloaded the Ubuntu 18.04 LTS image, installed Rufus, partitioned the USB stick with a single volume and had Rufus install Ubuntu on it. Important: this will not work if a data persistence is chosen; Ubuntu will fail booting then. Since I “just” wanted to try out basic hardware compatibility that isn’t much of a problem – or so I thought.

Ubuntu boots just fine off the stick. These things work out of the box: WIFI (5 GHz), webcam, USB, sound (internal/external), microphone (internal/external), keyboard backlight. I didn’t try bluetooth or the secondary nvidia graphics card.


The first surprise lurks behind trying to install Ubuntu on the SSD: no drives are found. The reason is that the BIOS enables Intel’s optane mode. Disabling it is kind of tricky: enter the BIOS, set a supervisor password (this unlocks advanced settings), go to advanced settings, press CTRL + S (this unlocks the hidden optane setting), change from optane to AHCI.

A few notes after running Ubuntu for a week now:

  • Resuming from standby will freeze the mouse pointer for 10-20 seconds; everything else works fine and the mouse pointer thaws after a while (Update April 2020: this issue mutated into a random, temporary freeze [~10 seconds] which goes away). Update May 2021: the issue is gone. I can run the laptop for a week without rebooting with several daily sleep/resume cycles without any issues.
  • After resuming from standby the laptop’s screen will freeze at some point (much) later; applications continue to run, key strokes are (apparently) not registered and the screen isn’t updated any more. A cold reboot is required after that. I was able to work around that by blacklisting nouveau.
  • One of the many fans always spins at a low to mid speed.
  • The laptop gets pretty warm even at moderate use, but that was an issue already with Windows
  • The battery won’t last more than 2 hours; this worries me as the laptop is brand new. Update May 2021: a year later, the situation hasn’t improved or deteriorated.
  • The webcam resolution is low and the picture is noisy; update January 2021: guvcview can set higher resolution and modes if enough light is present. The camera stays nosy though.
  • Sound occasionally stutters under I/O load. Sound in Firefox occasionally stops.
  • Ubuntu on the laptop feels overall faster and more responsive than Windows 10
  • Update April 2020: installing the proprietary nvidia-435 driver and using the prime package for switching between Intel and nvidia GPUs works flawlessly
  • Update May 2020: I was wrong, not disabling the nvidia GPU crashes the computer at some point. Uninstalled nvidia drivers again (blacklisting is not enough).
  • The bottom key row (YXCVBNM) on the keyboard goes dead sometimes. Squishing the plastic between the last key row and the touch pad seems to work around the issue. I’m waiting for it to become worse before using the warranty, because the issue is spurious and I can totally see how it wouldn’t show when I take the laptop back to the shop and try to demonstrate the issue. Update April 2021: the issue is a loose cable and very easily fixed as kalbasnikov shows on YouTube.
  • Bluetooth works, I didn’t try HDMI, LAN does almost 100 MB/s
  • 5GHz Wifi nets 10 MB/s but is sometimes unstable, 2,4 GHz works ok.
  • The lowest, non-zero, screen brightness level is too high, but writing values to the /sys/class/backlight/intel_backlight/brightness device allows much finer brightness control – but you have to write a script for that and bind it to a key combination.
  • 2x USB 3.0 and 1x USB 2.0 ports work fast and reliably.

Update May 2021

While fixing the dead keys issue (see comment above) I took the chance for a peek under the covers. The Nitro 5 has several internal extension slots I wasn’t aware of: two NVM express slots for flash memory, two RAM slots and an empty bay for a 2,5″ SSD. I found in the original packaging an easily overlooked cable and was able to install a 2,5″ SSD. I salvaged a second NVME flash from an older laptop and installed it next to the pre-installed one. Neither Linux nor the BIOS saw the flash, however once I switched their order, both were recognised just fine. One NVME slot is labelled as SATA/NVME and the other just as NVME. Surprisingly, one drive shows up as /dev/nvme0 and the other as /dev/sda and the SSD installed with the cable shows up as /dev/sdb. I have 3 flash drives now in the laptop 🙂

Ubuntu 20.04

A quick note about Ubuntu 20.04: I performed an upgrade from within a running 18.04 to 20.04 – everything works as expected. Even the hybrid nvidia graphics works now with the nouveau module with clean standby/resume. Wifi, trackpad and camera works fine as do the extra nvme and SSDs. More details will follow. Tested kernel 5.4.0-74-generic.

Desktop icons were missing after the upgrade, but that is probably not hardware-specific. Anyhow, there are easy workaround.

Minimum screen brightness is quite low (that is good) but can’t be reduced to zero any more.

Final thoughts

After almost 18 months with the laptop I admit that I’m fairly happy with it despite its quirks. The screen is excellent and the 120Hz refresh rate shows in smooth scrolling and mouse movement, though I wish it were brighter. I couldn’t get the nvidia hybrid graphics card working under Ubuntu, but as I use it mostly for work that is ok. It is fast, has plenty of RAM, a potent CPU and can be fitted with 3 flash drives for plenty of storage. The nitro 5 is quite a chunky piece of equipment, produces heat and drains its battery fast – so not a travel companion. The keyboard has an adjustable red backlight which I enjoy a lot, keys have sufficient depth and typing is ok even for longer sessions. Servicing and extending the laptop is extremely easy and despite rough handling it doesn’t show any signs of ageing.

8 thoughts on “Ubuntu on the Acer Nitro 5

  1. Hey i to have these problems…
    I had screen tearing as well, but i fixed it with little of google search.
    But how did you solve the screen freeze after suspend issue? I tried many things nothing worked.
    One of the article said to switch your driver manager so i switched from gdm3 to lightdm … nothing solved and tried changing back to gdm3, the theme is stuck from lightdm it doesn’t feel like 20.0 at all.


    1. Sorry to hear. Like I wrote in May 2020, there doesn’t seem to be a permanent solution other than uninstalling both nouveau and nvidia drivers and going with the integrated Intel graphics. Maybe you get better results with Wayland (on the login screen click on the settings wheel, pick Ubuntu wayland).


      1. Thanks that restored my theme silly of me for not knowing that, but I need the graphic card to handle my workload. Disabling it and using integrated graphics was not an option.

        I found a neat hack hope it is useful for you, screen freeze issue occurs when we suspend it (close lid/lock screen) so i changed the behaviour to do nothing

        sudo nano /etc/systemd/logind.conf

        When the files opens, uncomment the line #HandleLidSwitch=suspend by removing # in the beginning, and change the value to ignore( do nothing)


        Now, when you close the lid or lock screen and wake it up later will resume the way it is.
        I know it will still consume power when you close the lid/lock screen until a patch is available. I think this is a better solution.


  2. george, thank so much for the key binding to show off the SATA driver. I can’t understand why manufacturers hide this kind of things making things more complex… You saved me time mate. Cheers.


  3. Hi, I am wondering did you update the kernel to 5.10 or above. I read a Chinese post saying that much of the problems are resolved if you update the existing kernel.


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.